MW-2-HS™ Magnetic One Finger Reversible Ratchet Knob
The MW-2-HS™ Magnetic One Finger Reversible Ratchet Knob™ is a cutting-edge tool engineered to streamline tasks both in the workshop and on the job site. The MW-2-HS™ is designed for smaller head ratchets. For larger head “high-torque” models, the MW-1™ may be a better choice.
Made specifically for Milwaukee high-speed ratchets, the MW-2-HS was developed after we had a few users write in with an oscillation-related issue when using the MW-2 knob with high-speed ratchets. This oscillation caused the knob to actuate the directional change mechanism, unintentionally switching the ratchet from one direction to another.
The addition of the o-rings provides two distinct advantages:
1: The o-rings act as a damper between the knob and the head of the ratchet, eliminating the oscillation mentioned above, and providing seamless use with high-speed ratchets.
2: Working alongside two N52 neodymium magnets, the o-rings provide a friction fit in the head meaning the MW-2-HS is rock solid when you attach it to your ratchet.
Compatible with the following Milwaukee Part Numbers:
US: 2556-20, 2559-20, 2566-20, 2567-20, 2568-20, 2569-20
EU: FHIR38, FHIR14, FHIR38LR, FHIR14LR
NOT BOOT COMPATIBLE.
Contact us if you don't see your Milwaukee tool listed here.
MW-2-HS™ Magnetic One Finger Reversible Ratchet Knob™ product features:
O-ring Friction Fit: The addition of two carefully sized O-rings provides a damping action and friction fit in the head of the ratchet, making this the most solidly secured ratchet knob there is
Magnetic Feature: The magnetic design features two N52 neodymium magnets and securely holds the knob to the ratchet, enabling you to work with enhanced speed and precision.
One-Finger Operation: The direction of the Ratchet Knob™ can be reversed effortlessly using just one finger, promoting efficiency.
Glove friendly: Improves the user's control over the directional switch, allowing for much effective operation when wearing gloves.
You don't need any additional tools, just slide the MW-2-HS™ onto your existing ratchet and that's it! To ensure solid contact, please make sure your ratchet head is clear any dirt or debris.
Care: Your MW-2-HS will come with silicone lubricant on the O-rings. If you experience any friction or resistance from the O-rings, add a drop of oil or grease to encourage ease of rotation of the knob in the head of the ratchet. If the O-rings break or increased oscillation occurs, you can replace the O-rings using one of our O-ring service kits, that include the required components.
Get your tasks done faster and with greater efficiency by using the MW-2-HS™ Magnetic One Finger Reversible Ratchet Knob™!
The HS adaptation of the Ratchet Knob™ is a significant improvement over the standard MW-2. We have found, however, that users with XC or High-output batteries may still experience minor directional switching with fully charged batteries and heavy anvil load
Actual product may vary slightly from image.
The MW-2-HS™ Magnetic One Finger Reversible Ratchet Knob™ is a cutting-edge tool engineered to streamline tasks both in the workshop and on the job site. The MW-2-HS™ is designed for smaller head ratchets. For larger head “high-torque” models, the MW-1™ may be a better choice.
Made specifically for Milwaukee high-speed ratchets, the MW-2-HS was developed after we had a few users write in with an oscillation-related issue when using the MW-2 knob with high-speed ratchets. This oscillation caused the knob to actuate the directional change mechanism, unintentionally switching the ratchet from one direction to another.
The addition of the o-rings provides two distinct advantages:
1: The o-rings act as a damper between the knob and the head of the ratchet, eliminating the oscillation mentioned above, and providing seamless use with high-speed ratchets.
2: Working alongside two N52 neodymium magnets, the o-rings provide a friction fit in the head meaning the MW-2-HS is rock solid when you attach it to your ratchet.
Compatible with the following Milwaukee Part Numbers:
US: 2556-20, 2559-20, 2566-20, 2567-20, 2568-20, 2569-20
EU: FHIR38, FHIR14, FHIR38LR, FHIR14LR
NOT BOOT COMPATIBLE.
Contact us if you don't see your Milwaukee tool listed here.
MW-2-HS™ Magnetic One Finger Reversible Ratchet Knob™ product features:
O-ring Friction Fit: The addition of two carefully sized O-rings provides a damping action and friction fit in the head of the ratchet, making this the most solidly secured ratchet knob there is
Magnetic Feature: The magnetic design features two N52 neodymium magnets and securely holds the knob to the ratchet, enabling you to work with enhanced speed and precision.
One-Finger Operation: The direction of the Ratchet Knob™ can be reversed effortlessly using just one finger, promoting efficiency.
Glove friendly: Improves the user's control over the directional switch, allowing for much effective operation when wearing gloves.
You don't need any additional tools, just slide the MW-2-HS™ onto your existing ratchet and that's it! To ensure solid contact, please make sure your ratchet head is clear any dirt or debris.
Care: Your MW-2-HS will come with silicone lubricant on the O-rings. If you experience any friction or resistance from the O-rings, add a drop of oil or grease to encourage ease of rotation of the knob in the head of the ratchet. If the O-rings break or increased oscillation occurs, you can replace the O-rings using one of our O-ring service kits, that include the required components.
Get your tasks done faster and with greater efficiency by using the MW-2-HS™ Magnetic One Finger Reversible Ratchet Knob™!
The HS adaptation of the Ratchet Knob™ is a significant improvement over the standard MW-2. We have found, however, that users with XC or High-output batteries may still experience minor directional switching with fully charged batteries and heavy anvil load
Actual product may vary slightly from image.
The MW-2-HS™ Magnetic One Finger Reversible Ratchet Knob™ is a cutting-edge tool engineered to streamline tasks both in the workshop and on the job site. The MW-2-HS™ is designed for smaller head ratchets. For larger head “high-torque” models, the MW-1™ may be a better choice.
Made specifically for Milwaukee high-speed ratchets, the MW-2-HS was developed after we had a few users write in with an oscillation-related issue when using the MW-2 knob with high-speed ratchets. This oscillation caused the knob to actuate the directional change mechanism, unintentionally switching the ratchet from one direction to another.
The addition of the o-rings provides two distinct advantages:
1: The o-rings act as a damper between the knob and the head of the ratchet, eliminating the oscillation mentioned above, and providing seamless use with high-speed ratchets.
2: Working alongside two N52 neodymium magnets, the o-rings provide a friction fit in the head meaning the MW-2-HS is rock solid when you attach it to your ratchet.
Compatible with the following Milwaukee Part Numbers:
US: 2556-20, 2559-20, 2566-20, 2567-20, 2568-20, 2569-20
EU: FHIR38, FHIR14, FHIR38LR, FHIR14LR
NOT BOOT COMPATIBLE.
Contact us if you don't see your Milwaukee tool listed here.
MW-2-HS™ Magnetic One Finger Reversible Ratchet Knob™ product features:
O-ring Friction Fit: The addition of two carefully sized O-rings provides a damping action and friction fit in the head of the ratchet, making this the most solidly secured ratchet knob there is
Magnetic Feature: The magnetic design features two N52 neodymium magnets and securely holds the knob to the ratchet, enabling you to work with enhanced speed and precision.
One-Finger Operation: The direction of the Ratchet Knob™ can be reversed effortlessly using just one finger, promoting efficiency.
Glove friendly: Improves the user's control over the directional switch, allowing for much effective operation when wearing gloves.
You don't need any additional tools, just slide the MW-2-HS™ onto your existing ratchet and that's it! To ensure solid contact, please make sure your ratchet head is clear any dirt or debris.
Care: Your MW-2-HS will come with silicone lubricant on the O-rings. If you experience any friction or resistance from the O-rings, add a drop of oil or grease to encourage ease of rotation of the knob in the head of the ratchet. If the O-rings break or increased oscillation occurs, you can replace the O-rings using one of our O-ring service kits, that include the required components.
Get your tasks done faster and with greater efficiency by using the MW-2-HS™ Magnetic One Finger Reversible Ratchet Knob™!
The HS adaptation of the Ratchet Knob™ is a significant improvement over the standard MW-2. We have found, however, that users with XC or High-output batteries may still experience minor directional switching with fully charged batteries and heavy anvil load
Actual product may vary slightly from image.
Made for Milwaukee high speed and brushed ratchets.
-
Compatibility: Guaranteed to fit Milwaukee 2456-20, 2457-20, 2556-20, 2559-20, 2566-20*, 2567-20*, 2568-20*, 2569-20* ratchets. NOT BOOT COMPATIBLE.
Contact us if you don't see your Milwaukee ratchet listed here.
-
Magnetic Feature: The magnetic design securely holds the knob to the ratchet, enabling you to work with enhanced speed and precision.
One-Finger Operation: The direction of the Ratchet Knob™ can be reversed effortlessly using just one finger, promoting efficiency.
Glove friendly: Improves the user's control over the directional switch,allowing for much effective operation when wearing gloves.
You don't need any additional tools, just slide the MW-2™ onto your existing ratchet and that's it!
Get your tasks done faster and with greater efficiency by using the MW-2™ Magnetic One Finger Reversible Ratchet Knob™!